Additional information
Weight | 1 lbs |
---|---|
Dimensions | 9 × 3 × 3 in |
Power Can Gloss White is a 1K ready to use topcoat in an aerosol. It is used
for finishing coated surfaces in order to achieve a high gloss, durable finish.
Power Can Gloss White is capable of producing a coating of a film thickness
similar to that of a spray gun applied topcoat. The convenience of using a high
build coating in an aerosol means that masking is kept to a minimum. Mixing
paint and cleaning spray equipment are avoided as a result of using Power Can
Gloss White leading to savings in time and materials.
Power Can Gloss White is isocyanate free.
$12.16
In StockWeight | 1 lbs |
---|---|
Dimensions | 9 × 3 × 3 in |
MSV-21 2.1 VOC Urethane Clearcoat is a low VOC clear designed for general refinish work. MSV-21 is an easy to apply medium solids clear. MSV-21 2.1
VOC Urethane Clearcoat is versatile and delivers a productive, high gloss finish.
Hardener
• MHV-21F 2.1 VOC Fast Hardener
• MHV-21N 2.1 VOC Normal Hardener
• MHV-21S 2.1 VOC Slow Hardener
*Hardener must be ordered separately*
The Scotch-Brite™ 3M™ Roloc™ + clean and strip disc aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other difficult-to-reach areas. Its three-dimensional abrasive web conforms to most work pieces, offering a safer process than with wire bristle tools.
Make tough jobs easier. Scotch-Brite™ Discs can help you achieve a burr-free, paintable finish in fewer steps without damaging the base material. The non-woven, open-web, durable construction helps to resist loading and greatly increases the life of the disc. As a result, you will not have to change it as often.
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge.
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
Formulated for fast work, dries rapidely and is easy to sand. It’s creamy texture and good spreading allows easy repair of large areas. It may be applied on steel, electrozinc-coated, galvanized, aluminum or polyester surfaces.