Additional information
Weight | 11 lbs |
---|---|
Dimensions | 11 × 10 × 7 in |
U-Pol Bed Liner Kit Tintable is a 2-component urethane system designed for application directly to most original manufacturers’ paint finishes or any self-etching primer surface. Dries rapidly, resists stains and abrasion, and protects against rust, corrosion, UV damage, and extreme temperatures. Also makes an excellent sound deadener under or inside vehicles. Waterproof material stays flexible and reduces road noise and vibration.
Kit Includes: (4) 750 ml (25 oz) bottles of bed liner base (tintable) (1) application spray gun (requires 8 cfm @ 50-60 psi compressed air) (1) 1 liter of hardener (1) instructions
SPECIFICATIONS: At 68°F – Pot Life is 60 minutes. Cure Time: touch dry < 1 hour subject to film buildup. Light-Duty Use: 2-3 days. Regular-Duty Use: 5-7 days. Coverage: 125 square feet (standard 8 ft bed). Total kit makes 1.06 US gallons. Additional coats can be applied after 60 minutes. UV Resistant – Will not fade. Scratch and stain resistant. Helps deaden sounds and vibrations. Rapid drying – Spray 2nd coat within an hour. High adhesion, flexible.
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
$209.99
In StockDESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
20-second set urethane adhesive that replaces cyanoacrylates. Will not crack or become brittle like cyanoacrylates. Bonds to virtually any substrate and has excellent gap-filling capabilities for bonding small parts. Excellent for rebuilding cracked eyele.
Use for covering openings, doors, hoods, truck lids. For perfectly sealing gaps and holes.
3M™ Weatherstrip Adhesive is a black, fast-drying adhesive used for bonding and sealing automotive weather-stripping.
3M™ Weatherstrip Adhesive is a black-coloured, high heat-resistant adhesive that is waterproof and remains flexible. It has a fast strength buildup, helps to provide good creep-resistance and is intended to bond to a variety of rubbers, fabrics and metal. The adhesive is also excellent for bonding ethylene propylene diene (EPDM) rubber.
Reviews
There are no reviews yet.