your trusted source for automotive paint and refinishing
Shopping Cart$6,372.52
88
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “3M 05861 3M Dry Guide Coat Cartridge & Applicator Kit” has been added to your cart.
Sale!
3M 16205 MINI LIDS 125 MICRON FILTERS
125 micron filter lids are designed for use with water-borne paint systems
For solvent-base paint systems please consider 200 micron filters
Reduce solvent consumption (by as much as 70 percent )
Reduce cycle times, easy mixing and clean-up by as much as 50 percent
Efficient use of materials by always having the ability to spray 90 degree to the work surface, even upside down, thus less overspray, efficient use of materials
125 micron filter lids are designed for use with water-borne paint systems
For solvent-base paint systems please consider 200 micron filters
Reduce solvent consumption (by as much as 70 percent )
Reduce cycle times, easy mixing and clean-up by as much as 50 percent
Efficient use of materials by always having the ability to spray 90 degree to the work surface, even upside down, thus less overspray, efficient use of materials
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Holds 22 ounces (650 mL).
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
With PPS™ your spray gun functions at any angle Many painters mix more paint than they need to reduce the chance of starving the gun. PPS™ allows painters to spray at any angle without starving the paint gun.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. For use with part number 16001.
Small, hard cup that supports and holds the PPS small flexible liner, part number 16000. NOTE: The product image shows the Cup with a 3M Mix Ratio Insert installed. 3M Mix Ratio Inserts are not included with Cup and Collar packaging.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
3M™ Dry Guide Coat and Applicator Kit is a dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. When sanding polyester filler, it ensures the end result is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. It requires no masking and there is no dry time involved. It can also be used for both wet and dry sanding and contains no solvents. 3M™ Dry Guide Coat and Applicator Kit contains an applicator pad.
PPS Cups System
Reviews
There are no reviews yet.