Additional information
Weight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
$172.13
In StockWeight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge.
Designed for non-critical applications including bundling, sealing, and general paint masking. Our proprietary adhesive sticks easily, allowing fast application and with less lifting and curling. The crepe paper backing improves conformability, makes tearing easier and reduces application time. Standard natural colored crepe paper automotive paint masking tape.
24 ROLLS/CASE
High Volume Low Pressure Air Spray Gun (HVLP)
Characteristics : HVLP gravity spray gun for high quality finishes. Specifically designed for car refinishing. The air cap, needle and nozzle are all made of stainless steel and are suitable for use with the latest waterborne paints.
Optimum 350
Optimum 350 – for Primer
3M™ Overspray Protective Sheeting, 06727 is a paintable, high-density, tear-resistant, translucent film designed for critical edge masking as well as protection from paint overspray. Twelve foot film accommodates smaller cars.