your trusted source for automotive paint and refinishing
Shopping Cart$0.00
0
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
Sale!
SATA 1010389 0.3L RPS CUP WITH 125 MISCRON FILTER (40/BOX)
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
Kit contains 25 disposable lids with 125 micron filters – full diameter – , 25 disposable liners, and 10 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 28 oz/840 mL when used with mix ratio film insert (mix ratio inserts sold separately). For use with parts 16023 and 16124.
3M™ Weatherstrip Adhesive is a black, fast-drying adhesive used for bonding and sealing automotive weather-stripping.
3M™ Weatherstrip Adhesive is a black-coloured, high heat-resistant adhesive that is waterproof and remains flexible. It has a fast strength buildup, helps to provide good creep-resistance and is intended to bond to a variety of rubbers, fabrics and metal. The adhesive is also excellent for bonding ethylene propylene diene (EPDM) rubber.
A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex™ may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.
The 3M 08475, 3/8″ Seam Sealer Tape is a rubber backed, .020 thick tape with a very conformable design which allows the technician to duplicate the factory appearance and function typically found in door jams, trunk gutters, and hem flanges. Paintable immediately and does not require the use of heat to set. Very conformable.
3M™ Paste Rubbing Compound is specially designed to remove fine 1200, 1500 and 2000 grit sanding scratches in a wide range of automotive paint including clear coat. This compound for collision repair adds a fast cutting option to our complete paint finishing system, created for deeper colors and glossier finishes. Use with either a wool or foam compounding pad.
CLEAR-FIL C-7700 is a Low VOC, two component, High Performance Urethane Clearcoat. The unique Low VOC formulation of C-7700 is ideal for day-to-day multi-panel and overall repairs. This clearcoat will deliver a rich, durable, long-lasting, high gloss finish with exceptional
DOI everytime! C-7700 hardness and polishing properties while leaving behind a smooth, be used over solvent and waterbased basecoats and offers you the choice of air dry or force dry applications. We offer a range of fast to slow dry Hardeners, H-7701, H-7702, H-7703, to meet your various
speed-of-dry requirements. Select the appropriate hardener according to temperature and the size of the surface to which it will be applied to extract the optimum performance from the Low VOC C-7700 High Performance Urethane Clearcoat system.
High Performance Machine Polish. Quickly and effectively removes compound swirl marks and produces an outstanding finish. Good handling, easy cleanup. The Perfect-It brand means this is 3M`s highest performing machine polish.
A two component primer surfacer that has exceptional filling capabilities and patented 4:1 mix ratio technology. It is ideal for holding down troublesome repairs on fiberglass and SMC. Super Build 4:1 passes 500 hours in salt spray tests (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant. Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast Polyester Primer Catalyst only!
Especially easy to sand, two-component polyester filling putty. To be applied in order to equalize or close possible pin holes, small irregularities, small paint damages or scratches on the body of cars, vehicles or machines. Recommended also to be used as a putty and dowel setting material as well as an adhesive for iron, wood, stone and porcelain.
Characteristic Features:
– adhesive on iron, steel, aluminum, galvanized substrates and glass fiber
PPS Systems
PPS Systems
Adhesives
Polishing Pads & Compounds
Clearcoat
Reviews
There are no reviews yet.