your trusted source for automotive paint and refinishing
Shopping Cart$0.00
0
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
Sale!
CARWORX 161.625 Paint Cup System (PCS) Kit – 650ML/125u
PAINT CUP SYSTEM designed for easy assembly and clean-up while reducing the use of solvent. Specially engineered seal allows you to paint at any angle, maximizing productivity while protecting paint from contamination. Every kit includes 50 disposable lids, 50 liners, 20 caps and one outer cup and collar.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Holds 22 ounces (650 mL).
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
With PPS™ your spray gun functions at any angle Many painters mix more paint than they need to reduce the chance of starving the gun. PPS™ allows painters to spray at any angle without starving the paint gun.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. For use with part number 16001.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Limco LC4200 Low VOC Clearcoat is a low 250 gms/liter VOC acrylic urethane clearcoat for use over Limco Supreme PLUS low VOC basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling.
Rage® Ultra is the world’s best sanding body filler. Its unparalleled sanding qualities are a result of the patent pending formula that contains renewable technology. Its non-sag formula has excellent filling properties, while eliminating the need for finishing putty. Rage® Ultra contains ZNX-7® and is part of the Metalworks® system.
Norton Multi-Air Cyclonic is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quicker, cuts cooler, and lasts longer without generating heat. Our engineered ceramic grain is the perfect abrasive for any job, including those with scratch-resistant clears and E-coats, composites and aluminum. Its versatility eliminates the need for additional specialty abrasives.
FEATURES & BENEFITS
• Norton SG ceramic grain for quicker/cooler cut with better longevity for superior cut on abrasion-resistant paints and clears
• Unique fiber-reinforced latex/paper backing is flexible and has easy removal with maximum tear resistance for increased durability
• Water-based stearate (No-Fil) improves load resistance and extends life
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
PRODUCT OVERVIEW:
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
Small panel (non-structural) adhesive; in universal cartridge. Incredible strength and sandability. Use for small panel bonding, repairing and filling plastic, metal, SMC and fiberglass. Applications include cab corners, door skins, small quarter panels, rust panels. Work time: 5-10 minutes. Unclamp time: 30-45 minutes.
PPS Cups System
Reviews
There are no reviews yet.