Additional information
Weight | 1.13 lbs |
---|---|
Dimensions | 7 × 7 × 2 in |
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam disc used in a spot repair system for removing sanding scratches before using rubbing compound.
$122.57
In StockWeight | 1.13 lbs |
---|---|
Dimensions | 7 × 7 × 2 in |
The 3M 08308, Automix Heavy-Bodied Seam Sealer is a two-part epoxy seam sealer for use in sealing vertical or horizontal seams to match OEM sealers. It is non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime is 10 minutes. No shrinkage or cracking. Beads will remain the same size and shape as extruded. Will cure in about 1 hour. Will need 3M # 08117 Applicator Gun.
Brushable seam sealing of joints, before the installation of body components, covering strips, etc.
Sealing compound, based on synthetic rubber, temperature stable from -25 degrees C to 80 degrees C.
The 1001 Flexpert Welding Studs are the most popular stud sold. They are 2.2 mm copper coated and have been specially designed for easy welding and easy removal after the pulling is complete. The shafts are strong yet flexible. This is the preferred stud for use with slide hammers.
METAL GLAZE® Ultra is the world’s best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin™. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks® products to improve flowout. Formulated with ZNX-7® for improved adhesion.
A VOC compliant acrylic lacquer primer surfacer that easily fills grind marks, sand scratches and other minor surface imperfections. Sands easily to an ultra-fine finish with minimal shrinkage. Can be applied to prepared metal, body filler, polyester glazing putty, wood,fiberglass and aged sanded O.E.M. topcoats.
OPTIMAL COMPOUNDS & POLISHING KIT is a start-up kit that contains compounds and polish. Includes one Optimal Cut, one Optimal Polish, one Optimal Glaze, one Optimal Fast Wax, one Optimal Shine and one Buffing Pad Kit.