Be the first to review “3M 2097
PARTICULATE FILTER, 2097, P100” Cancel reply
PARTICULATE FILTER, 2097, P100” Cancel reply
The 3M™ Particulate Filter 2097 is NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapour relief and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2097 with nuisance level organic vapour relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odour relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
$12.18
In StockDESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
Area of application : Professional masking tape for paint shops. Thin backing. Waterproof and temperature stable up to 120 ° C (284 ° F).
24 ROLLS/CASE
Coarse foam compounding pad used to apply compound to remove sanding scratches and swirls. Medium cut. Convoluted foam face design holds compounds better to reduce slinging of compound. Suggested for use with Perfect-It™ Rubbing Compound (39060, 06085, 06086). Use backup pads 05717 or 05718.
Tork Low-Lint Cleaning Cloth is a soft yet durable wiper and is perfect for surface preparation and cleaning. This cloth can be used in the Tork Folded Wiper/Cloth Dispenser that protects the refills from dirt and offers an one-at-a time dispensing to reduce consumption and waste.
Reviews
There are no reviews yet.