Be the first to review “3M 6005
FORMALDEHYDE/ ORGANIC VAPOR CARTRIDGE” Cancel reply
FORMALDEHYDE/ ORGANIC VAPOR CARTRIDGE” Cancel reply
NIOSH approved against formaldehyde and certain organic vapors. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
Use in a variety of applications, including laboratories, wood processing, carpet manufacturing, and primary metals manufacturing. When properly fitted, helps provide respiratory protection from formaldehyde and certain organic vapors at concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health (IDLH). OSHA requires that gas proof goggles be worn with half facepiece respirators when used against formaldehyde.
$24.75
Out of stock
Area of application:Adheres to fillers, painted surfaces, and metals including galvanized.
Characteristics:Liquid putty. Easy sanding, will not clog sandpaper. Excellent viscosity.
A two component primer surfacer that has exceptional filling capabilities and patented 4:1 mix ratio technology. It is ideal for holding down troublesome repairs on fiberglass and SMC. Super Build 4:1 passes 500 hours in salt spray tests (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant. Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast Polyester Primer Catalyst only!
A general-purpose packaging tape for light duty storage and sealing applications. This economical yet reliable tape resists tearing, splitting, curling and moisture. Ideal for noncritical sealing applications.
3M™ Tartan™ Box Sealing Tape is a general-purpose packaging tape used for noncritical box sealing applications. This product has a conformable backing and a pressure-sensitive hot melt adhesive system. This construction provides a good closure for lightweight boxes exposed to minimal distribution hazards.
Area of application : Professional masking tape for paint shops. Thin backing. Waterproof and temperature stable up to 120 ° C (284 ° F).
24 ROLLS/CASE
USCRed Glazing Putty. A one component, fast drying glazing putty with an extra fine texture for filling pinholes, scratches and dimples on bare metal and hardened plastic fibers.
Hardening agent for use with all polyester resins and gel coats. Plastic squeeze tube has graduated measure for mixing convenience. Use this Methyl Ethyl Ketone Peroxide catalyst according to the resin/gel coat label directions
Buffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
MSV-25 Low VOC Quick Cure Clearcoat is designed for quick repairs over a wide temperature range in areas that require a 2.1 VOC Clearcoat. This product
is intended for small, 1-2 panel size jobs. MSV-25 Low VOC Quick Cure Clearcoat can be polished, or delivered same day without baking.
Hardener
• MHV-25 Low VOC Quick Cure Clearcoat Hardener
*Hardener must be ordered separately*
Reviews
There are no reviews yet.