Additional information
Weight | 11.34 lbs |
---|---|
Dimensions | 91.44 × 12.7 × 12.7 in |
Our 3M™ White Masking Paper is specially treated to resist heat from paint booths and penetration by paint solvents, urethanes, base coats and clear coats – ideal for collision repair. It is tightly bonded, virtually eliminating lint or fiber contamination that can occur using paper masking. And its thin but conformable construction makes it easy to handle, boosting shop efficiency.
How Our Masking Paper Improves Your Collision Repair
Designed specifically for automotive aftermarket applications, our 3M™ White Masking Paper (PDF, 34 Kb) helps you work more efficiently during a full range of masking jobs large and small. It is durable yet conformable and is available in a variety of sizes, making it easy to handle for protecting even irregular vehicle surfaces from paint overspray. This paper is specially treated to resist penetration by paint solvents, base coats, clear coats and urethanes, reducing rework caused by bleed-through. It also withstands heat — the masking paper can hold up during a bake cycle up to 400°F (204°C) for 30 minutes, making it suitable for use in paint booths.
Designed Specifically for Automotive Aftermarket
This 3M™ White Masking Paper brings the science of 3M directly to auto body and collision repair, helping professionals work more efficiently and achieve their best results. Its design includes high tolerance to heat, resistance to chemical bleed-through and little or no loose lint or fibers — yet it still affords the easy, fast conformability of paper for truly effective masking.
3M™ Petrifilm™ Salmonella Express Confirmation Discs are part of the 3M™ Petrifilm™ Salmonella Express System, designed to provide fast, accurate qualitative detection and biochemical confirmation of Salmonella in 44 hours.
The 3M™ Petrifilm SALX System consists of an unique medium for the recovery and growth of Salmonella species, 3M™ Petrifilm™ Salmonella Express Plate that provides presumptive results and the 3M™ Petrifilm™ Salmonella Express Confirmation Disc for a biochemical confirmation. This system utilizes 3M Food Safety’s Petrifilm technology, an industry standard, and delivers an all-in-one test and biochemical confirmation method in as little as 44 hours .The 3M™ Petrifilm™ Salmonella Express System has been evaluated against defined requirements using scientific rigor to achieve AOAC® Performance TestedSM (Certificate #061301) and AOAC® Official Method of AnalysisSM (#2014.01).
$28.73
In StockWeight | 11.34 lbs |
---|---|
Dimensions | 91.44 × 12.7 × 12.7 in |
Features:
3M™ Platinum™ Plus is manufactured with only the highest quality ingredients, including our proprietary adhesion promoter. Platinum™ Plus is a super creamy formula that achieves extreme adhesion to Galvanized Steel, Aluminum, E-Coat, Fiberglass, SMC, cured Epoxy, Urethane and Primers.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
XPSAP Semi-Rigid Epoxy is a two-component semi rigid modified epoxy designed as an “ALL PURPOSE” plastic repair material. XPSAP’s unique formulation allows you to use this product on the full spectrum of automotive plastics. When in doubt on which type of plastic (flexible, semi-rigid, or rigid) you are repairing use XPSAP. XPSAP is formulated to work on all plastics including the more common and also the traditional “tough to bond” plastics (TPUR, PUR, RIM, PP, TPO, TPE). This product is designed as an adhesive and filler to be used on the front and backsides of a repair. XPSAP can also be used over our Urethane Repair material (XSMAP, XSM11000). XPSAP is an outstanding Semi-Rigid filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPSAP may also be used as a multipurpose adhesive. Some areas of use include: door skins (metal and plastic), rusted patch panels, backer panels (metal, SMC, Fiberglass, and Rigid Plastics), ground effects, etc. XPSAP bonds, fills, and sands with outstanding performance. This semi-rigid adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals
Reviews
There are no reviews yet.