your trusted source for automotive paint and refinishing
Shopping Cart$15.14
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “PRT-9295W PRO-TEK STRIPE REMOVING WHEEL ERASER” has been added to your cart.
Sale!
3M 07848 Gray Scotch-Brite
Increased scratch density, but still very flexible so it can get into hard- to-sand places
Tough non-woven nylon fibres specially coated to help minimize loading for a uniform finish throughout life of the hand pad
Available in three grades
Scotch-Brite™ Automotive Durable Flex Hand Pad 07848 combines high performance features to give you the fast, consistent scuff your sanding jobs require. It is an ultra flexible and conformable web designed for cleaning and fine finishing. The Scotch-Brite™ Automotive Durable Flex Hand Pad replaces steel wool to eliminate contamination.
The performance of Scotch-Brite™ Durable Flex Hand Pad is comparable to steel wool, but our Scotch-Brite™ pads won’t shred during use, rust after use, or create fine metal splinters. The non-woven, open-web material resists loading and can be used dry, with water or some solvents, and rinsed clean for reuse. This multipurpose pad can be used by hand for precise control. Breakthrough fiber coating technology allows Scotch-Brite™ abrasive products to cut faster and produce a more consistent scratch than competitive non-woven abrasive products, reducing the time and effort it takes to finish parts. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. Our Scotch-Brite™ industrial abrasive products’ non-woven web keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.
Suggested Applications
Ideal for everyday uses like prepping surfaces for primer and on colour coat, general scuffing, cleaning and hand blending
Microfine ranges from grade 1200 to 1500. Flexible foam pad enables user to sand hard-to-reach areas such as headlight openings, around door handles, door jambs, etc. Helps to eliminate finger marks and can be used wet or dry.
The 3M™ Particulate Filter 2097 is NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapour relief and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2097 with nuisance level organic vapour relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odour relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
NIOSH approved for environments containing certain oil and non-oil-based particles
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Nuisance level organic vapour relief
Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
Nuisance level organic vapour relief
Welding
Brazing
Soldering
Metal pouring
Torch cutting
Exposure to lead, asbestos, cadmium, arsenic, and MDA
Easy-to-use, time-saving products to mask door jambs and other apertures like hood and deck lid openings that need to be sealed during the painting process. The Premium Foam Masking Tape features a semi-split design and offset adhesive to ensure a soft paint edge.
An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7® for superior adhesion to galvanized steel, bare steel and aluminum. Part of the MetalWorks® System that honors the OEM corrosion warranty. Contains Hattonite™ for effortless sanding. Blue cream hardener included
The 3M 08308, Automix Heavy-Bodied Seam Sealer is a two-part epoxy seam sealer for use in sealing vertical or horizontal seams to match OEM sealers. It is non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime is 10 minutes. No shrinkage or cracking. Beads will remain the same size and shape as extruded. Will cure in about 1 hour. Will need 3M # 08117 Applicator Gun.
Scotch® Performance Green Masking Tape 233+, 26338 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
Wholesale Scuff Pads for Paint Prep
