Additional information
Weight | 1.13 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
The 3M 8219, Automix / Fiberglass Repair Adhesiveis a two-part urethane adhesive that is used to bond SMC and FRP (traditional fiberglass) body panels to each other and to metal. It is designed to bond composite and metal to each other, along with metal to metal applications. Requires 3M 08117, Applicator Gun to apply.
$109.25
In StockWeight | 1.13 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
Area of application : Professional masking tape for paint shops. Thin backing. Waterproof and temperature stable up to 120 ° C (284 ° F).
24 ROLLS/CASE
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
16′ X 350′ PLASTIC OVERSPRAY SHEETING IS AN ECONOMICAL WAY TO PROTECT SURFACES NOT BEING PAINTED. A THIN MIL PLASTIC SHEETING THAT IS FAST AND EASY TO HANDLE AND APPLY. IT WILL CLING TO SURFACES BEING MASKED AND RESISTS TEARING WHEN PULLING OR REPOSITIONING. SINCE IT IS CORONA TREATED PAINT WILL ADHERE WITHOUT FLAKING OFF, WHILE RESISTING SOLVENT PENTRATION AND PAINT BLEED THROUGH.
Features:
· 30% – 50% gains in cut rate, far less loading on the job and greater worklife.
· Entirely new level of work speed is attainable.
· Agressive sanding action isn`t easily dulled.
· New anti-loading agent which actually throws dust from the grain as it cuts.
· New latex-reinforced backing can withstand whatever job torture you throw at it.
· Unparalled speed, scratch consistency and an overall quality of finish never before achieved.
Two-part epoxy that is used to repair SMC, FRP (traditional fiberglass), and other rigid plastic parts. This product is designed for use as a filler and an adhesive. It is epoxy-based for easy sanding and is formulated for excellent featheredge.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
DESCRIPTION:
Carworx Clearworx 2.1 VOC is a premium Acrylic Urethane Clear designed for areas that require certain VOC limits. It has excellent gloss retention, leveling and cure properties. Can be air dried or forced dried. Simple 4:1 mix ratio makes this clear easy to use. This clear can be applied over all acrylic and polyester color systems.
MIX RATIO
►4 Parts 2.1 VOC Clearcoat
►1 Part Clearcoat Activator:
191.001: Slow
191.002: Medium
191.003: Fast