Pronto Kombi Spot Putty. Little scratches. Tiny pinholes. You’re ready to prime. “Uh oh! Somebody grab the PRONTO!” This one-component, air dry kombi putty is ideal for last minute minor imperfections.
Spreads easy and dries quickly
Small enough to fit in a pocket
European style 1K air dry kombi putty
High solids for excellent fill
Minimal shrinking
Great sanding
5 ounce tube
COLOR: Olive drab (as packaged)
MIX: Ready to use
SUBSTRATE: Metal. Aluminum. Galvanized and zinc coated steel. 1K and 2K primer. Aged, sanded OEM topcoats.
SUGGESTED USE: Use for last minute repairs and minor imperfections, pinholes, chips and scratches.
TOP COAT: Primer, primer surfacer, sealer, basecoat and single stage.
USCRed Glazing Putty. A one component, fast drying glazing putty with an extra fine texture for filling pinholes, scratches and dimples on bare metal and hardened plastic fibers.
Best under lacquer, acrylic and synthetic finishes
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
Limco LC4200 Low VOC Clearcoat is a low 250 gms/liter VOC acrylic urethane clearcoat for use over Limco Supreme PLUS low VOC basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling.
MRS-771 2.1 V.O.C. Acrylic Lacquer Primer Surfacer-Grey is a premium acrylic lacquer primer surfacer formulated for the most stringent V.O.C. regulations. This primer surfacer must be reduced with the proper Zero V.O.C. reducer to be compliant. MRS-771 has excellent adhesion with superior filling and sanding properties. For optimum performance a compliant self-etching primer or epoxy primer should be applied to bare substrate before applying MRS-771. Packaged in gallons (4 gallons/case)
For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
MAXIM™ Medium Urethane Adhesive is a urethane repair material that provides incredible strength and sandability. Best used when a longer open time is required to complete the repair. This material is used for non-structural repairs on all plastics, fiberglass, and SMC.
Kit contains 25 disposable lids with 125 micron filters – full diameter – , 25 disposable liners, and 10 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 28 oz/840 mL when used with mix ratio film insert (mix ratio inserts sold separately). For use with parts 16023 and 16124.
Body Filler, Fiberglass & Putty
