Carworx Kombi Filler is a one component nitro cellulose stopper for filling small imperfections like scratches, pinholes and shallow dents. Due to its smooth consistency, Kombi Filler can be applied in very thin coats. After sanding, a porous free surface is provided which can be painted without the need of a primer.
Dolphin Glaze is a premium, technically advanced finishing glaze designed to eliminate pinholes and surface imperfections prior to painting. Its self-leveling formulation gives a smooth ultra fine finish which requires minimal sanding.
Pinhole resistant
Excellent adhesion
Semi-flexible
Substrates: Direct to metal, prepared OEM paint surfaces, aluminum, galvanized, SMC, fiberglass, lightly abraded E coat, most plastics
The 3M 8219, Automix / Fiberglass Repair Adhesiveis a two-part urethane adhesive that is used to bond SMC and FRP (traditional fiberglass) body panels to each other and to metal. It is designed to bond composite and metal to each other, along with metal to metal applications. Requires 3M 08117, Applicator Gun to apply.
Uniform pressure thanks to foam backing, adaptable on shaped surfaces, fine sanding of round edges, fine sanding on flat areas, fine sanding of primer, paint and lacquers, sanding for blending uses,fine sanding before polishingm matt sanding. Can wet sand or dry sand.
The 3M™ Particulate Filter 2097 is NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapour relief and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2097 with nuisance level organic vapour relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odour relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
NIOSH approved for environments containing certain oil and non-oil-based particles
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Nuisance level organic vapour relief
Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
Nuisance level organic vapour relief
Welding
Brazing
Soldering
Metal pouring
Torch cutting
Exposure to lead, asbestos, cadmium, arsenic, and MDA
An economical masking tape designed for production shops. Crepe backing, will not leave any residue when removed and temperature stable up to 80°C (176°F).
3M™ Vinyl Tape 471+ Indigo, vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removability.
AG-40 Autoglas® Euro Design Clearcoat is a premium high solids European style clearcoat. AG-40 provides optimum flow and leveling in an easy to apply, 2:1 mix, that can be air or force dried.
Hardener AH-201 Euro Design Fast Hardener For Spot & Panel AH-202 Euro Design Medium Hardener Small Jobs/Cool Temperatures AH-203 Euro Design Slow Hardener Medium Jobs/Medium Temperatures
Designed specifically for automotive aftermarket applications with 3M Masking Tapes and 3M Masking Equipment
Flexible and pliable to cover irregular surfaces for higher productivity
Tightly bonded construction makes for little or no lint or fibers
Specially treated to resist bleed-through of solvents, urethanes, base and clear coats
Heat resistant – a sheet can withstand a 400°F baking cycle for 30 minutes
Our 3M™ White Masking Paper is specially treated to resist heat from paint booths and penetration by paint solvents, urethanes, base coats and clear coats – ideal for collision repair. It is tightly bonded, virtually eliminating lint or fiber contamination that can occur using paper masking. And its thin but conformable construction makes it easy to handle, boosting shop efficiency.
Available in a range of sizes
How Our Masking Paper Improves Your Collision Repair Designed specifically for automotive aftermarket applications, our 3M™ White Masking Paper (PDF, 34 Kb) helps you work more efficiently during a full range of masking jobs large and small. It is durable yet conformable and is available in a variety of sizes, making it easy to handle for protecting even irregular vehicle surfaces from paint overspray. This paper is specially treated to resist penetration by paint solvents, base coats, clear coats and urethanes, reducing rework caused by bleed-through. It also withstands heat — the masking paper can hold up during a bake cycle up to 400°F (204°C) for 30 minutes, making it suitable for use in paint booths.
Designed Specifically for Automotive Aftermarket This 3M™ White Masking Paper brings the science of 3M directly to auto body and collision repair, helping professionals work more efficiently and achieve their best results. Its design includes high tolerance to heat, resistance to chemical bleed-through and little or no loose lint or fibers — yet it still affords the easy, fast conformability of paper for truly effective masking.
3M™ Petrifilm™ Salmonella Express Confirmation Discs are part of the 3M™ Petrifilm™ Salmonella Express System, designed to provide fast, accurate qualitative detection and biochemical confirmation of Salmonella in 44 hours.
The 3M™ Petrifilm SALX System consists of an unique medium for the recovery and growth of Salmonella species, 3M™ Petrifilm™ Salmonella Express Plate that provides presumptive results and the 3M™ Petrifilm™ Salmonella Express Confirmation Disc for a biochemical confirmation. This system utilizes 3M Food Safety’s Petrifilm technology, an industry standard, and delivers an all-in-one test and biochemical confirmation method in as little as 44 hours .The 3M™ Petrifilm™ Salmonella Express System has been evaluated against defined requirements using scientific rigor to achieve AOAC® Performance TestedSM (Certificate #061301) and AOAC® Official Method of AnalysisSM (#2014.01).
Auto Body Filler Putty
