CARWORX 137.682
BEDROCK URETHANE COATING (PART A)
Area of Application:
Ideal as a truck bedliner, as well as on trailers, boats and R.V.’s.
Characteristic Features:
Adheres to metal, wood, plastics and concrete. Drive away in 3 hours. May be sprayed, rolled or brushed on.
*Click on MSDS link for Part A of Bedrock. Visit 137.682 Part B for access to Part B MSDS.
$94.72
In StockRECENTLY VIEWED
- Wholesale Automotive Clear Coat & Hardener
CARWORX 190.101
Bullet Clear (Gallon)DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
(0 reviews) - Abrasives
3M 07448
Gray Scotch-BriteUse ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
(0 reviews) - Auto Body Adhesives
3M 08475
3/8″x30 Seam Sealer TapeThe 3M 08475, 3/8″ Seam Sealer Tape is a rubber backed, .020 thick tape with a very conformable design which allows the technician to duplicate the factory appearance and function typically found in door jams, trunk gutters, and hem flanges. Paintable immediately and does not require the use of heat to set. Very conformable.
(0 reviews) - Automotive Filler
EVERCOAT 125
Rage UltraRage® Ultra is the world’s best sanding body filler. Its unparalleled sanding qualities are a result of the patent pending formula that contains renewable technology. Its non-sag formula has excellent filling properties, while eliminating the need for finishing putty. Rage® Ultra contains ZNX-7® and is part of the Metalworks® system.
(0 reviews) - 6" Velcro Sanding Pads
NORTON 23614
Bluemag Long File 80G VelcroFeatures:
- 2 3/4 In x 16 1/2 In – 80E Grit.
- Roughest, toughest coarse grit ever made.
- Cuts faster and cooler and loads less.
- Latex-reinforced E-weight backing is so indestructible, it won`t edge chip, tear or curl.
- Most consistent scratch possible.
- Cutting edges are uniformly aligned to point straight up, for ultra-sharp sanding action.
- Ability to self-sharpen on the job and able to blast through work faster, with a much higher-quality scratch.
(0 reviews) - Wholesale Automotive Paint Booth Filters
TAFF PB2L-2020
PAINT BOOTH TACKIFIED PANEL FILTER 20X20 (24/CS)DESCRIPTION:
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
PRODUCT OVERVIEW:
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
IDEAL APPLICATIONS:
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
(0 reviews) - 6" Velcro Sanding Pads
CARWORX 142.610
6″ OPTIMUM GOLD VELCRO (P400)OPTIMUM GOLD VELCRO DISC is a premium quality sandpaper with an excellent cutting performance and a longer lasting life. Ideal for contour sanding.
100 UNITS/BOX
(0 reviews)