your trusted source for automotive paint and refinishing
Shopping Cart$70.72
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “3M 36525 2″ 40GRIT ROLOC GREEN CORPS DISC” has been added to your cart.
Sale!
NORTON 31054 4″ Blaze Rapid Strip Discs TR
Norton Blaze Rapid Strip TR+ Disc 4″ X 1/2″
Norton Blaze Rapid Strip discs are constructed with thick, strong synthetic fibers and extra-coarse ceramic alumina abrasive. The open web construction of the disc provides fast cutting action with very little loading. Safer than wire bristle tools, Norton Blaze Rapid Strip aggressively removes rust and paint from drip moldings, pinch welds, door jambs, seams and other difficult to reach areas. The TR+ attachment system allows for rugged cleaning in tight areas.
Maxim™ Multi-Fix plastic repair is a two component epoxy repair material that provides speed, incredible strength and sandability. This fast setting epoxy simplifies the plastic repair process by eliminating substrate identification and adhesion promoter. Multi-Fix is ideal for fixing tears, nicks and gouges in plastic parts and other quick fix applications.
3M™ Platinum™ Plus is manufactured with only the highest quality ingredients, including our proprietary adhesion promoter. Platinum™ Plus is a super creamy formula that achieves extreme adhesion to Galvanized Steel, Aluminum, E-Coat, Fiberglass, SMC, cured Epoxy, Urethane and Primers.
Vacuum processed to be pinhole free.
20-minute cure time means you’re sanding sooner.
Extra-creamy, easy-spreading formula has excellent vertical hang.
Extremely easy to sand, pinhole-free, stain-free, and tack-free.
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
Urethane Adhesive for use on metail, plastic, SMC, fiberglass and all “olefenic” plastics. Multi purpose use to bond, repair and fill. Fast See technical data sheet for more details
Part: XSM6002 Code: 6002 250 ml Universal Cartridge
Norton Multi-Air Cyclonic is perfect for refinishing any job, especially those that require an extremely durable abrasive that cuts quicker, cuts cooler, and lasts longer without generating heat. Our engineered ceramic grain is the perfect abrasive for any job, including those with scratch-resistant clears and E-coats, composites and aluminum. Its versatility eliminates the need for additional specialty abrasives.
FEATURES & BENEFITS
• Norton SG ceramic grain for quicker/cooler cut with better longevity for superior cut on abrasion-resistant paints and clears
• Unique fiber-reinforced latex/paper backing is flexible and has easy removal with maximum tear resistance for increased durability
• Water-based stearate (No-Fil) improves load resistance and extends life
Tork Low-Lint Cleaning Cloth is a soft yet durable wiper and is perfect for surface preparation and cleaning. This cloth can be used in the Tork Folded Wiper/Cloth Dispenser that protects the refills from dirt and offers an one-at-a time dispensing to reduce consumption and waste.
Soft and flexible – ideal in tight spaces
Meets your cleaning needs due to suitability with most solvents, disinfectants, and detergents
Perfect for working with sensitive surfaces due to antistatic and extremely low-lint properties
Scotch-Brite™ Roloc™ Surface Conditioning Disc 07485 offers ease of disc centering and is used in conjunction with 3M™ Roloc™ Disc Pad Assembly 05540. Available from tough grinding to fine finishing. 3 inch diameter. Coarse.
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam disc used in a spot repair system for removing sanding scratches before using rubbing compound.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Details
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
NIOSH approved against certain organic vapors, acid gases, ammonia methylamine, formaldehyde with P100 particulate filter
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Wide range of applications reduces inventory needs
To establish cartridge replacement frequency visit: 3M.com/ServiceLifeSoftware
Evercoat’s® easiest sanding body filler. The unsurpassed sanding qualities are attributed to Hattonite™, a unique ingredient which reduces heat and friction created by aggressive sanding. Rage Gold also contains ZNX-7® for adhesion to galvanized steel and aluminum. Plus, it’s stain resistant for use with basecoat/clearcoat paints. Part of the MetalWorks® System. Blue cream hardener included.
Auto Body Adhesives
