Additional information
Weight | 2.56 lbs |
---|---|
Dimensions | 12 × 10 × 2 in |
For dry sanding old paint, primer, primer surfacer, and
between-color coats; also for deburring, removing sand
scratches, shaping and finishing plastic filler, and featheredging
repaired areas. Special No-Fil coating prevents
premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
100 discs per package. Price per package.
$67.20
In StockWeight | 2.56 lbs |
---|---|
Dimensions | 12 × 10 × 2 in |
3M PPS 20 Spray Cup System Kit is a great way to stock up on supplies for PPS 20, our all-in-one solution for measuring, mixing, filtering and spraying paint materials for automotive, industrial, home, furniture, cabinetry and more Our latest and greatest PPS system features improvements like a quarter-turn locking collar with each lid, new paint cup in each kit, domed lid design for better spray performance, wider lid fluid spout and redesigned adapter for a more stable lid-to-gun connection Each lid strains paint material with a built-in 200-micron filter, commonly used for solvent-based paint materials Unlike with conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint And with a fresh lid and liner for each mix, there’s less risk of outside contamination Specially designed PPS stainless steel metal adapters let you use the PPS 20 system with virtually any spray gun Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more Kit contains 1 paint cup, 50 disposable liners, 50 disposable lids with locking collar and 200-micron filter, and 32 sealing plugs
DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
Use ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
The 3M 08475, 3/8″ Seam Sealer Tape is a rubber backed, .020 thick tape with a very conformable design which allows the technician to duplicate the factory appearance and function typically found in door jams, trunk gutters, and hem flanges. Paintable immediately and does not require the use of heat to set. Very conformable.
Rage® Ultra is the world’s best sanding body filler. Its unparalleled sanding qualities are a result of the patent pending formula that contains renewable technology. Its non-sag formula has excellent filling properties, while eliminating the need for finishing putty. Rage® Ultra contains ZNX-7® and is part of the Metalworks® system.
Features:
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications