Mixing Tips by Evercoat®. Maxim™ Static Mixing Tips are designed to be used with Evercoat’s Maxim™ two-component products 812, 813,815, 816, 822, 823, 885, 886 887, and 898. If you’re looking for a quality product that will serve you for years to come, look no further.
Kit contains 25 disposable lids with 125 micron filters, 25 disposable liners, and 10 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 28 oz/840 mL when used with with mix ratio film insert (mix ratio inserts sold separately). For use with part number 16023 or 16124.
Two-part epoxy (1:1) used to repair most plastic parts, including bumper covers and other plastic body panels including PP, fiberglass, Metton, Telene, SMC, TEO and urethane. Formulated to finish the front side of flexible repairs or used over the top of urethane adhesives. Incredibly easy to sand in 20 minutes or less. No plastic identification required. No adhesion promoter needed No tip needed-hand mix with a clean spreader. Work time: 1-2 mins Sanding Time: 15-20 mins Paint/Cure time: 60 mins.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun. PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs. Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
Auto Body Adhesives
