Additional information
Weight | 9.08 lbs |
---|---|
Dimensions | 39 × 5 × 5 in |
Norton 6728, 16′ x 400′ Plastic Overspray Sheeting is an economical way to protect surfaces not being painted. The Norton 6728 is a thin mil plastic sheeting that is fast and easy to handle and apply. It will cling to surfaces being masked and resists tearing when pulling or repositioning. Since it is Corona treated paint will adhere without flaking off, while resisting solvent pentration and paint bleed through.
$67.79
In StockWeight | 9.08 lbs |
---|---|
Dimensions | 39 × 5 × 5 in |
Scotch® Performance Green Masking Tape 233+, 26344 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
MSV-25 Low VOC Quick Cure Clearcoat is designed for quick repairs over a wide temperature range in areas that require a 2.1 VOC Clearcoat. This product
is intended for small, 1-2 panel size jobs. MSV-25 Low VOC Quick Cure Clearcoat can be polished, or delivered same day without baking.
Hardener
• MHV-25 Low VOC Quick Cure Clearcoat Hardener
*Hardener must be ordered separately*
AG-40 Autoglas® Euro Design Clearcoat is a premium high solids European style clearcoat. AG-40
provides optimum flow and leveling in an easy to apply, 2:1 mix, that can be air or force dried.
Hardener
AH-201 Euro Design Fast Hardener For Spot & Panel
AH-202 Euro Design Medium Hardener Small Jobs/Cool Temperatures
AH-203 Euro Design Slow Hardener Medium Jobs/Medium Temperatures
*Hardener must be ordered separately*
A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex™ may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
48 ROLLS/CASE
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications