Additional information
Weight | 7.15 lbs |
---|---|
Dimensions | 10 × 4 × 4 in |
$134.49
In StockWeight | 7.15 lbs |
---|---|
Dimensions | 10 × 4 × 4 in |
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
U-Pol Bed Liner Kit Tintable is a 2-component urethane system designed for application directly to most original manufacturers’ paint finishes or any self-etching primer surface. Dries rapidly, resists stains and abrasion, and protects against rust, corrosion, UV damage, and extreme temperatures. Also makes an excellent sound deadener under or inside vehicles. Waterproof material stays flexible and reduces road noise and vibration.
Kit Includes: (4) 750 ml (25 oz) bottles of bed liner base (tintable) (1) application spray gun (requires 8 cfm @ 50-60 psi compressed air) (1) 1 liter of hardener (1) instructions
SPECIFICATIONS: At 68°F – Pot Life is 60 minutes. Cure Time: touch dry < 1 hour subject to film buildup. Light-Duty Use: 2-3 days. Regular-Duty Use: 5-7 days. Coverage: 125 square feet (standard 8 ft bed). Total kit makes 1.06 US gallons. Additional coats can be applied after 60 minutes. UV Resistant – Will not fade. Scratch and stain resistant. Helps deaden sounds and vibrations. Rapid drying – Spray 2nd coat within an hour. High adhesion, flexible.
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3M™ Automotive Acrylic Foam Attachment Tape 06378 is a .030-inch thick gray acrylic foam tape with proven performance acrylic adhesive and a red release liner.
6378 is characterized by good peel and shear adhesion, good internal strength, good conformability and good plasticizer resistance. Typical applications include lightweight vehicle nameplates and trim, including narrow and light body side moldings. 06378 is not recommended for medium- to heavy-weight trim attachment.
Area of application
Additive for M/S clear coats to accelerate drying time