Additional information
Weight | 4.84 lbs |
---|---|
Dimensions | 12 × 12 × 8 in |
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
No additional components are necessary. There is no other cup system with the same functions but with three components only!
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
$141.11
In StockDESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
Area of application : Professional masking tape for paint shops. Thin backing. Waterproof and temperature stable up to 120 ° C (284 ° F).
24 ROLLS/CASE
Coarse foam compounding pad used to apply compound to remove sanding scratches and swirls. Medium cut. Convoluted foam face design holds compounds better to reduce slinging of compound. Suggested for use with Perfect-It™ Rubbing Compound (39060, 06085, 06086). Use backup pads 05717 or 05718.
Tork Low-Lint Cleaning Cloth is a soft yet durable wiper and is perfect for surface preparation and cleaning. This cloth can be used in the Tork Folded Wiper/Cloth Dispenser that protects the refills from dirt and offers an one-at-a time dispensing to reduce consumption and waste.
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
Reviews
There are no reviews yet.