your trusted source for automotive paint and refinishing
Shopping Cart$32.95
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “3M 05954Super Duty Compound 946ml” has been added to your cart.
Sale!
SATA 1010438 0.6L RPS CUP WITH 125 MISCRON FILTER (60/BOX)
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
3M™ PPS™ Series 2.0 Spray Cup System Kit, 26314, Mini (6.8 fl oz, 200 mL), 125u Micron Filter, 1 kit per case3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M™ Paint Preparation System (PPS™) on the disposable spray cup market. Kit contains 50 disposable lids with 200 micron or 125 micron filters, 50 disposable liners, 1 reusable hard shell cup and 32 sealing plugs.
Kit contains 50 disposable lids with 125 micron filters – full diameter – , 50 disposable liners, and 20 sealing plugs. The 125 micron filters are recommended for water borne paint or primer applications. Graduated measurement to 20.3 oz/600 mL when used with mix ratio film insert (mix ratio inserts sold separately). For use with part number 16001.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
3M Adhesion Promoter 06396 is a liquid primer used for most low surface energy plastics. This would include common low surface energy plastics used for automotive dash and interior trim applications (TPO, PPO, PP, PC, PC + ABS, etc.). 25 Individual Packages per Box.
MRS-771 2.1 V.O.C. Acrylic Lacquer Primer Surfacer-Grey is a premium acrylic lacquer primer surfacer formulated for the most stringent V.O.C. regulations. This primer surfacer must be reduced with the proper Zero V.O.C. reducer to be compliant. MRS-771 has excellent adhesion with superior filling and sanding properties. For optimum performance a compliant self-etching primer or epoxy primer should be applied to bare substrate before applying MRS-771. Packaged in gallons (4 gallons/case)
High Performance Machine Polish. Quickly and effectively removes compound swirl marks and produces an outstanding finish. Good handling, easy cleanup. The Perfect-It brand means this is 3M`s highest performing machine polish.
Adhesion Promoter (SXPP/SXPP24/XPPP) is a uniquely formulated blend of proprietary resins that create a chemical bond on ‘difficult to bond to’ plastics allowing adhesion of repair fillers and coatings to these substrates. Adhesion Promoter prepares properly cleaned and/or repaired parts for the application of adhesives, fillers and topcoats. Adhesion Promoter is also used as an excellent “sealer” for all Flexible and Semi-Rigid plastics including TPO and TPE.
PPS Cups System
Reviews
There are no reviews yet.