Additional information
Weight | 18 lbs |
---|---|
Dimensions | 36 × 23 × 3 in |
ANDREAE Standard Filters are used in the exhaust of paint booths for over-spray collection.
The front V-shaped wall prevents over-spray bounce back and migration. The deeper V-shape of the back wall is the paint holding pocket.
The exhaust holes are misaligned to divert the paint laden airflow to the holding pocket, where the paint is captured, while maintaining a constant flow during the loading phase.
Lasts 3 x 5 times longer than poly, fiberglass or mesh media
Captures any wet solid or liquid particles
Standard & high efficiency options
V shape wall prevents over spray and bounce back migration
Easy to cut, replace and install
$60.00
In StockMSV-21 2.1 VOC Urethane Clearcoat is a low VOC clear designed for general refinish work. MSV-21 is an easy to apply medium solids clear. MSV-21 2.1
VOC Urethane Clearcoat is versatile and delivers a productive, high gloss finish.
Hardener
• MHV-21F 2.1 VOC Fast Hardener
• MHV-21N 2.1 VOC Normal Hardener
• MHV-21S 2.1 VOC Slow Hardener
*Hardener must be ordered separately*
The Scotch-Brite™ 3M™ Roloc™ + clean and strip disc aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other difficult-to-reach areas. Its three-dimensional abrasive web conforms to most work pieces, offering a safer process than with wire bristle tools.
Make tough jobs easier. Scotch-Brite™ Discs can help you achieve a burr-free, paintable finish in fewer steps without damaging the base material. The non-woven, open-web, durable construction helps to resist loading and greatly increases the life of the disc. As a result, you will not have to change it as often.
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge.
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
Formulated for fast work, dries rapidely and is easy to sand. It’s creamy texture and good spreading allows easy repair of large areas. It may be applied on steel, electrozinc-coated, galvanized, aluminum or polyester surfaces.
Reviews
There are no reviews yet.