Additional information
Weight | 4.84 lbs |
---|---|
Dimensions | 16 × 14 × 9 in |
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Holds 22 ounces (650 mL).
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
With PPS™ your spray gun functions at any angle
Many painters mix more paint than they need to reduce the chance of starving the gun. PPS™ allows painters to spray at any angle without starving the paint gun.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. For use with part number 16001.
$204.55
In StockWeight | 4.84 lbs |
---|---|
Dimensions | 16 × 14 × 9 in |
3M – Perfect It Buffing & Polishing Compound 06085 06064 06068
Scotch® Performance Green Masking Tape 233+, 26334 is a highly-conformable tape that provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
48 ROLLS/CASE
*Hardener must be ordered separately*
The 3M 8219, Automix / Fiberglass Repair Adhesiveis a two-part urethane adhesive that is used to bond SMC and FRP (traditional fiberglass) body panels to each other and to metal. It is designed to bond composite and metal to each other, along with metal to metal applications. Requires 3M 08117, Applicator Gun to apply.
ANDREAE Standard Filters are used in the exhaust of paint booths for over-spray collection.
The front V-shaped wall prevents over-spray bounce back and migration. The deeper V-shape of the back wall is the paint holding pocket.
The exhaust holes are misaligned to divert the paint laden airflow to the holding pocket, where the paint is captured, while maintaining a constant flow during the loading phase.
Lasts 3 x 5 times longer than poly, fiberglass or mesh media
Captures any wet solid or liquid particles
Standard & high efficiency options
V shape wall prevents over spray and bounce back migration
Easy to cut, replace and install
High Performance Machine Polish. Quickly and effectively removes compound swirl marks and produces an outstanding finish. Good handling, easy cleanup. The Perfect-It brand means this is 3M`s highest performing machine polish.
Includes the 3M™ Low Maintenance Half Facepiece 07026 (large), 1 pair organic vapor cartridges 07046, 1 pair filter retainers 07054, and 2 pairs of P-95 filters 07194.
Lightweight, with a swept-back cartridge and filter design for unobstructed vision and excellent balance it is the benchmark in low maintenance respirators. With replaceable cartridges and filters, the facepiece is used until it becomes worn or damaged, when it must be replaced. The 07179 is 3M recommended for spray paint applications in the automotive aftermarket.