Additional information
Weight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
$172.13
In StockWeight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Buffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
3M™ Soft Edge Foam Masking Tape provides a fast and easy way to mask door jambs and other apertures, such as hood and deck lid openings.
Features:
· 30% – 50% gains in cut rate, far less loading on the job and greater worklife.
· Entirely new level of work speed is attainable.
· Agressive sanding action isn`t easily dulled.
· New anti-loading agent which actually throws dust from the grain as it cuts.
· New latex-reinforced backing can withstand whatever job torture you throw at it.
· Unparalled speed, scratch consistency and an overall quality of finish never before achieved.
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
Paintable in 30 minutes. Permanently flexible with no shrinkage. Withstands salt water and most solvents