Additional information
Weight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
$172.13
In StockWeight | 2.56 lbs |
---|---|
Dimensions | 14 × 9 × 6 in |
3M™ PPS™ Series 2.0 Spray Cup System Kit, 26314, Mini (6.8 fl oz, 200 mL), 125u Micron Filter, 1 kit per case3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M™ Paint Preparation System (PPS™) on the disposable spray cup market. Kit contains 50 disposable lids with 200 micron or 125 micron filters, 50 disposable liners, 1 reusable hard shell cup and 32 sealing plugs.
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Use with Premium Manual Applicator 200ml 08117, 3M Static Mixing Nozzle 08193.
This product is also sold in our 400 ml size as SMC/FRP Repair – 90, 08274
Maxim™ Large Panel Bonding Adhesive is a one-to-one epoxy adhesive used for bonding various surfaces. It is used for replacing door skins, roofs, quarter panels, truck bedsides, utility vehicle sides and other non-structural panels. Maxim™ Large Panel Bonding Adhesive has excellent adhesion to SMC, cold-rolled steel, aluminum and e-coats. Maxim™ is backed by a lifetime warranty by Evercoat.
Two-part polyester finishing and blending putty. Includes ZNX-7® for adhesion to galvanized metal, aluminum, steel, SMC, and O.E.M paint. Extra-thin formula spreads smoothly. Easily fills grind marks, pinholes, uneven surfaces and other MetalWorks® body fillers and glazing putties to enhance their ease of working. Sands easily. Pinhole-free. Helps prevent staining or bleed-through when used under basecoat/clearcoat paint systems. Blue cream hardener included.
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Meets GM 6449G & Chrysler MS-CD 507.
Fast drying, red lacquer putty. Spreads smoothly and sands easily with minimal shrinkage