Additional information
Weight | 5 lbs |
---|---|
Dimensions | 14 × 14 × 11 in |
3M™ PPS™ Series 2.0 Spray Cup System Kit, 26314, Mini (6.8 fl oz, 200 mL), 125u Micron Filter, 1 kit per case3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M™ Paint Preparation System (PPS™) on the disposable spray cup market. Kit contains 50 disposable lids with 200 micron or 125 micron filters, 50 disposable liners, 1 reusable hard shell cup and 32 sealing plugs.
$164.98
In StockWeight | 5 lbs |
---|---|
Dimensions | 14 × 14 × 11 in |
Tork Industrial Low-Lint Cleaning Cloth is excellent for industrial cleaning applications that are partical sensitive. This cloth can be used in the Tork Folded Wiper/Cloth Dispenser that protects the refills from dirt and offers an one-at-a time dispensing to reduce consumption and waste.
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
Limco LC4200 Low VOC Clearcoat is a low 250 gms/liter VOC acrylic urethane clearcoat for use over Limco Supreme PLUS low VOC basecoat colors. LC4200 is easy to apply and has excellent gloss and leveling.
Adhesion Promoter (SXPP/SXPP24/XPPP) is a uniquely formulated blend of proprietary resins that create a chemical bond on ‘difficult to bond to’ plastics allowing adhesion of repair fillers and coatings to these substrates. Adhesion Promoter prepares properly cleaned and/or repaired parts for the application of adhesives, fillers and topcoats. Adhesion Promoter is also used as an excellent “sealer” for all Flexible and Semi-Rigid plastics including TPO and TPE.
U-Pol Bed Liner Kit Tintable is a 2-component urethane system designed for application directly to most original manufacturers’ paint finishes or any self-etching primer surface. Dries rapidly, resists stains and abrasion, and protects against rust, corrosion, UV damage, and extreme temperatures. Also makes an excellent sound deadener under or inside vehicles. Waterproof material stays flexible and reduces road noise and vibration.
Kit Includes: (4) 750 ml (25 oz) bottles of bed liner base (tintable) (1) application spray gun (requires 8 cfm @ 50-60 psi compressed air) (1) 1 liter of hardener (1) instructions
SPECIFICATIONS: At 68°F – Pot Life is 60 minutes. Cure Time: touch dry < 1 hour subject to film buildup. Light-Duty Use: 2-3 days. Regular-Duty Use: 5-7 days. Coverage: 125 square feet (standard 8 ft bed). Total kit makes 1.06 US gallons. Additional coats can be applied after 60 minutes. UV Resistant – Will not fade. Scratch and stain resistant. Helps deaden sounds and vibrations. Rapid drying – Spray 2nd coat within an hour. High adhesion, flexible.
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.