This water-based masking fi lm is applied with a spray gun. The liquid material dries to a clear, non-bonding fi lm, protecting all coated vehicle surfaces against spray mist (of solvent and water-based paints), solvents, dust, welding sparks, polish splashes as well as from any light mechanical damage.
Characteristic features
Gravity-fed spray gun for water-based paints. Recommended nozzle size: 1.8–2.2 mm.
16′ X 350′ PLASTIC OVERSPRAY SHEETING IS AN ECONOMICAL WAY TO PROTECT SURFACES NOT BEING PAINTED. A THIN MIL PLASTIC SHEETING THAT IS FAST AND EASY TO HANDLE AND APPLY. IT WILL CLING TO SURFACES BEING MASKED AND RESISTS TEARING WHEN PULLING OR REPOSITIONING. SINCE IT IS CORONA TREATED PAINT WILL ADHERE WITHOUT FLAKING OFF, WHILE RESISTING SOLVENT PENTRATION AND PAINT BLEED THROUGH.
The 3M 08475, 3/8″ Seam Sealer Tape is a rubber backed, .020 thick tape with a very conformable design which allows the technician to duplicate the factory appearance and function typically found in door jams, trunk gutters, and hem flanges. Paintable immediately and does not require the use of heat to set. Very conformable.
Single Sided Black Foam Polishing Pad used to remove compound swirl marks and fine paint surface defects. Flat back design. For use with 3M™ machine polishes and 3M™ Hookit™ back up pads, 05717 or 05718. Proven performer.
Norton Blaze Rapid Strip discs are constructed with thick, strong synthetic fibers and extra-coarse ceramic alumina abrasive. The open web construction of the disc provides fast cutting action with very little loading. Safer than wire bristle tools, Norton Blaze Rapid Strip aggressively removes rust and paint from drip moldings, pinch welds, door jambs, seams and other difficult to reach areas. The TR+ attachment system allows for rugged cleaning in tight areas.
3M™ Dry Guide Coat and Applicator Kit is a dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. When sanding polyester filler, it ensures the end result is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. It requires no masking and there is no dry time involved. It can also be used for both wet and dry sanding and contains no solvents. 3M™ Dry Guide Coat and Applicator Kit contains an applicator pad.
Advanced G3 Liquid is a one-step system that provides a fast cutting action and a high gloss finish. It combines all the reliability and other advantages of G3 Paste with a reduced clean up time when compounding by machine. It provides the user with improved versatility, quality and speed to final finish verses competitive products. AG3 has been tested against all major paint brands and has proven compliant to remove defects from all modern paint systems. Using the product with water will result in maximum performance benefits. – See more at: http://www.farecla.com/automotive/compounding-systems/advanced-g3-liquid-compound#sthash.PtrlmFor.dpuf
Masking Products
