Additional information
Weight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
XRF Rigid Epoxy is a two-component modified rigid epoxy designed for the repair of rigid composite plastics and fiberglass. XRF is formulated to work on all rigid composite plastics including (SMC, BMC & RTM). XRF is ideal for use on fiberglass parts where extra strength is required. This product is designed as an adhesive and filler on the front and backsides of repairs. XRF can also be used over our Urethane Repair material (XSMAR). XRF is an excellent rigid filler that is commonly used by the professional plastic repairers due to its sanding, adhesion and featheredging characteristics. XRF may also be used to bond non structural metal, SMC, Fiberglass, Rigid plastics, and glass. XRF bonds, fills, and sands with no pinholes. This rigid adhesive/filler is also used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
$32.06
In StockWeight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
Buffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Norton 6728, 16′ x 400′ Plastic Overspray Sheeting is an economical way to protect surfaces not being painted. The Norton 6728 is a thin mil plastic sheeting that is fast and easy to handle and apply. It will cling to surfaces being masked and resists tearing when pulling or repositioning. Since it is Corona treated paint will adhere without flaking off, while resisting solvent pentration and paint bleed through.
Designed for use in grinding, sanding and buffing applications in the automotive aftermarket. Lightweight, two-strap filtering facepiece respirators with an adjustable noseclip and new braided headstraps, this respirator helps provide excellent protection.
The 3M™ Particulate Filter 2071 is NIOSH approved for environments containing certain oil and non-oil based particles.
Use with 3M™ Respirators, 5000 Series or 3M™ Cartridge, 6000 Series with 3M™ Adapter, 502, or 3M™ Half and Full Facepiece, 6000, 3M™ Half and Full Facepiece, 7000, and 3M™ Half and Full Facepiece, FF-400 Series with bayonet filter holders. When properly fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. The filter is both flame and water resistant. Do not use in environments that are immediately dangerous to life or health (IDLH). 3M offers a wide array of options when it comes to cartridges and filters. 3M™ Respirator Cartridges and Filters offer easy installation to your Powered Air Purifying Respirators (PAPR) or Supplied Air Respirator assembly making them a great choice for fast paced industrial environments.