DOM.4008 Flexible Bumper Repair Kit
XPST Flexible Epoxy is a two-component flexible modified epoxy designed for the repair of flexible plastics. XPST is formulated to work on all flexible plastics including the more common (TPUR, PUR, RIM). XPST is also compatible with the traditional “tough to bond” plastics (PP, TPO, TPE). This product is designed as an adhesive and as a filler to be used on the front and backsides of a repair. XPST can also be used over our Urethane Repair material (XSMAF). XPST is an outstanding flexible filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPST bonds, fills, and sands with outstanding performance. This flexible adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
| Weight | .52 lbs |
|---|---|
| Dimensions | 7.75 × 3.75 × 1.75 in |
Related Products
RS 206- Beige Brush On Seam Sealer
RS 206- Beige Brush On Seam Sealer
A permanent, flexible sealant that matches OEM brushed in sealers. Duplicates trunk, cowling, floor pan and other factory sealers. Dries quickly. Paintable in 30 minutes and won’t lift behind brush on rough surfaces.
GEM 3–24- 3″ 24Grit Red 25/Box
GEM 3–24- 3″ 24Grit Red 25/Box
3M 6348- Trim Masking Tape -15M
3M 6348- Trim Masking Tape -15M
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge
PRESTA 131730- Scuff Stuff
PRESTA 131730- Scuff Stuff
Water-soluble cleaners strip away waxes, sealers, road film and dirt while super fine abrasives create a consistent surface profile.
This profiling helps coatings spread flatter and bond more securely to the treated surface. Use Scuff Stuff to prepare blend and hard-to-reach areas, such as around door locks and under seals and door jambs. It is ideal for cleaning and abraiding urethane bumpers. Scuff Stuff rinses off easily and completely with water.
3M.16202 Lids W/200 Micron Filters
3M.16202 Lids W/200 Micron Filters
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun.
PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs.
Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
