Additional information
Weight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
$18.53
In StockWeight | 1 lbs |
---|---|
Dimensions | 12 × 2 × 2 in |
Fast 4:1 Polyester Primer Catalyst is a patented, epoxy enriched catalyst that provides unsurpassed performance in cooler temperatures, when mixed with Evercoat’s line of 4:1 polyester primer surfacers.
Water-soluble cleaners strip away waxes, sealers, road film and dirt while super fine abrasives create a consistent surface profile.
This profiling helps coatings spread flatter and bond more securely to the treated surface. Use Scuff Stuff to prepare blend and hard-to-reach areas, such as around door locks and under seals and door jambs. It is ideal for cleaning and abraiding urethane bumpers. Scuff Stuff rinses off easily and completely with water.
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
Features :
Area of application: Grinds finer for easier sanding. Good adhesion on steel, aluminum, galvanized, fiber glass and different types of plastic. Recoatable with all basecoats and water basecoats.
HARDENER: BESA 201.215.1
MSV-21 2.1 VOC Urethane Clearcoat is a low VOC clear designed for general refinish work. MSV-21 is an easy to apply medium solids clear. MSV-21 2.1
VOC Urethane Clearcoat is versatile and delivers a productive, high gloss finish.
Hardener
• MHV-21F 2.1 VOC Fast Hardener
• MHV-21N 2.1 VOC Normal Hardener
• MHV-21S 2.1 VOC Slow Hardener
*Hardener must be ordered separately*