your trusted source for automotive paint and refinishing
Shopping Cart$75.70
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “3M 204256″ Clean Sand Soft Disc Pad” has been added to your cart.
Sale!
EVERCOAT 282 Z Grip Body Filler
An advanced, clog-free, lightweight body filler for today’s high tech metals. Formulated with ZNX-7® for superior adhesion to galvanized steel, bare steel and aluminum. Part of the MetalWorks® System that honors the OEM corrosion warranty. Contains Hattonite™ for effortless sanding. Blue cream hardener included
3M™ Platinum™ Plus is manufactured with only the highest quality ingredients, including our proprietary adhesion promoter. Platinum™ Plus is a super creamy formula that achieves extreme adhesion to Galvanized Steel, Aluminum, E-Coat, Fiberglass, SMC, cured Epoxy, Urethane and Primers.
Vacuum processed to be pinhole free.
20-minute cure time means you’re sanding sooner.
Extra-creamy, easy-spreading formula has excellent vertical hang.
Extremely easy to sand, pinhole-free, stain-free, and tack-free.
Dolphin Glaze is a premium, technically advanced finishing glaze designed to eliminate pinholes and surface imperfections prior to painting. Its self-leveling formulation gives a smooth ultra fine finish which requires minimal sanding.
Pinhole resistant
Excellent adhesion
Semi-flexible
Substrates: Direct to metal, prepared OEM paint surfaces, aluminum, galvanized, SMC, fiberglass, lightly abraded E coat, most plastics
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam disc used in a spot repair system for removing sanding scratches before using rubbing compound.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
3M PPS 20 Spray Cup System Kit is a great way to stock up on supplies for PPS 20, our all-in-one solution for measuring, mixing, filtering and spraying paint materials for automotive, industrial, home, furniture, cabinetry and more Our latest and greatest PPS system features improvements like a quarter-turn locking collar with each lid, new paint cup in each kit, domed lid design for better spray performance, wider lid fluid spout and redesigned adapter for a more stable lid-to-gun connection Each lid strains paint material with a built-in 200-micron filter, commonly used for solvent-based paint materials Unlike with conventional aluminum or other metal paint cup systems, with PPS you don’t have to mix paint in extra cups and filter it into a paint reservoir, so you waste less paint And with a fresh lid and liner for each mix, there’s less risk of outside contamination Specially designed PPS stainless steel metal adapters let you use the PPS 20 system with virtually any spray gun Use to apply paints, stains, varnishes, basecoats, undercoats, primers, sealers, clearcoats, gelcoats, sprayable adhesives and more Kit contains 1 paint cup, 50 disposable liners, 50 disposable lids with locking collar and 200-micron filter, and 32 sealing plugs
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Two-part polyester finishing and blending putty. Includes ZNX-7® for adhesion to galvanized metal, aluminum, steel, SMC, and O.E.M paint. Extra-thin formula spreads smoothly. Easily fills grind marks, pinholes, uneven surfaces and other MetalWorks® body fillers and glazing putties to enhance their ease of working. Sands easily. Pinhole-free. Helps prevent staining or bleed-through when used under basecoat/clearcoat paint systems. Blue cream hardener included.
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
Best Sellers
