Additional information
Weight | 1 lbs |
---|---|
Dimensions | 10 × 4 × 2 in |
Maxim™ Multi-Fix plastic repair is a two component epoxy repair material that provides speed, incredible strength and sandability. This fast setting epoxy simplifies the plastic repair process by eliminating substrate identification and adhesion promoter. Multi-Fix is ideal for fixing tears, nicks and gouges in plastic parts and other quick fix applications.
$64.40
In StockWeight | 1 lbs |
---|---|
Dimensions | 10 × 4 × 2 in |
3M™ Dry Guide Coat and Applicator Kit is a dry powder with applicator used to highlight surface imperfections and sand scratches prior to finishing with abrasives. When sanding polyester filler, it ensures the end result is flat with no ripples and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating. It requires no masking and there is no dry time involved. It can also be used for both wet and dry sanding and contains no solvents. 3M™ Dry Guide Coat and Applicator Kit contains an applicator pad.
The 3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Organic Vapour/Acid Gas Cartridge/Filter 60923 P100 helps provide protection against certain organic vapours, acid gasses and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, hydrogen sulfide, hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include chemical manufacturing, laboratories, petrochemical, and pharmaceuticals. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge/filter selection works for many different applications. This cartridge/filter is commonly used in the following industries: chemicals, general manufacturing, and pharmaceuticals.
Trim Black is an acrylic coating formulated to match the OEM finish on automotive trim components. For use on plastic, aluminum, steel, stainless steel and chrome.
FEATURES
3M™ Overspray Protective Sheeting, 06728 is a paintable, high-density, tear-resistant, translucent film designed for critical edge masking as well as protection from paint overspray. This .4 mil sheet is tear-resistant, clear and durable.
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
3M™ Overspray Protective Sheeting, 06727 is a paintable, high-density, tear-resistant, translucent film designed for critical edge masking as well as protection from paint overspray. Twelve foot film accommodates smaller cars.
Although we recommend applying on a cool car in the shade, Fast Wax® still comes off easy even on hot surfaces in direct sunlight. It can even be applied over 24-hour old clear coat and single stage paints, because its beatheable film allows solvents from fresh paint and clears to escape.