Additional information
Weight | 2.56 lbs |
---|---|
Dimensions | 9 × 4 × 4 in |
Farecla G3 Fine Finishing Polish, 1 kg/1 Liter (G3F101/00141) offers rapid removal of minor surface defects and swirl marks from all modern paint systems and is excellent on darker colors.
Fast scratch removal permanently removes P3000 and finer sanding marks and restores gloss from lightly oxidized paint work and dull surfaces leaving a brilliant high gloss finish. Dry use and clean to use results in easy clean up, minimal splatter and dusting.
G3 Fine is ideally applied using a Farecla G Mop Finishing Black Foam or Lambswool buff pads which was engineered in tandem with the compound to provide optimum performance or similar soft finishing pad or by hand.
Designed for use on Medium Solids (MS), High Solids (HS) and Ultra High Solids (UHS) paints and Scratch Resistant Clears.
For extra shine and protection, follow with either Farecla G3 Glaze Gloss Enhancer or G3 Wax Premium Liquid Protection.
Sold in 1.1lb (500g) half quart and 2.2 lb (1 kg) product per quart size bottles.
$62.54
Out of stock
DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
Area of application : Professional masking tape for paint shops. Thin backing. Waterproof and temperature stable up to 120 ° C (284 ° F).
24 ROLLS/CASE
Coarse foam compounding pad used to apply compound to remove sanding scratches and swirls. Medium cut. Convoluted foam face design holds compounds better to reduce slinging of compound. Suggested for use with Perfect-It™ Rubbing Compound (39060, 06085, 06086). Use backup pads 05717 or 05718.
Tork Low-Lint Cleaning Cloth is a soft yet durable wiper and is perfect for surface preparation and cleaning. This cloth can be used in the Tork Folded Wiper/Cloth Dispenser that protects the refills from dirt and offers an one-at-a time dispensing to reduce consumption and waste.
The 3M™ Multi-Gas/Vapour Cartridge/Filter 60926 is NIOSH approved against certain organic vapours, acid gasses and particulates. Use with 3M™ Half and Full Facepiece Respirators 6000, 7000 and FF-400 Series with bayonet filter holders.
3M™ Multi-Gas/Vapour Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapours, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are Immediately Dangerous to Life or Health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, oil and gas, and primary metals.
Reviews
There are no reviews yet.