Additional information
Weight | 4.84 lbs |
---|---|
Dimensions | 8 × 8 × 4 in |
Removes rust and surface imperfections on ferrous and non-ferrous metals and stainless.
Aluminum oxide resin fiber sanding discs are the most aggressive coated abrasive for sanding large areas. These resin fiber sanding discs have a high resistance to heat, glazing and loading, and are excellent on ferrous and non-ferrous metals. These resin fiber sanding discs are recommended for blending edges, seams and corners, weld grinding and deburring.
$15.39
In StockWeight | 4.84 lbs |
---|---|
Dimensions | 8 × 8 × 4 in |
Trim Black is an acrylic coating formulated to match the OEM finish on automotive trim components. For use on plastic, aluminum, steel, stainless steel and chrome.
FEATURES
3M™ Overspray Protective Sheeting, 06728 is a paintable, high-density, tear-resistant, translucent film designed for critical edge masking as well as protection from paint overspray. This .4 mil sheet is tear-resistant, clear and durable.
BETASEAL™ U-418 speeds installations – eliminates the glass priming step. BETASEAL U-418 provides primerlessto-glass convenience with excellent workability, sag resistance and convenient drive-away times. BETASEAL U-418 is easy to use and does not require heating. It is available in cartridges. Product benefits include: Primerless to auto glass FMVSS crash proven Meets all long-term durability requirements Ready to use – no heating required Applications Structurally bonded or direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass Other uses such as attaching hardware to glass and backfilling to install reveal moldings or other trim BETASEAL U-418 Quick Cure Auto Glass Urethane Adhesive Application details See vehicle manufacturer’s recommendations for additional details. Do not use any other manufacturers’ primers, cleaners or other chemicals in conjunction with any BETASEAL adhesive system Apply at temperatures of 40˚F (4.4˚C) and warmer Physical properties Appearance – black, smooth paste Solids content – 94% Flash point – > 110˚F (43˚C) Weight per volume – 10.1 lbs/gal Specific gravity – 1.2 Sag – none Odor – minimal Tack-free time – 25 minutes after application at 72˚F (22˚C) and 50% RH Working time – 15 minutes at 72˚F (22˚C) and 50% RH Full cure – less than 24 hours at 72˚F (22˚C) and 50% RH
3M™ Overspray Protective Sheeting, 06727 is a paintable, high-density, tear-resistant, translucent film designed for critical edge masking as well as protection from paint overspray. Twelve foot film accommodates smaller cars.
Although we recommend applying on a cool car in the shade, Fast Wax® still comes off easy even on hot surfaces in direct sunlight. It can even be applied over 24-hour old clear coat and single stage paints, because its beatheable film allows solvents from fresh paint and clears to escape.
3M™ Dry Guide Coat is used to identify surface imperfections such as pinholes in body filler and deep scratches in primer. Unlike liquid and aerosol guide coats, Dry Guide Coat requires no masking before use, and there is no dry time after application. The dry formula contains no intentionally added solvents and doesn’t clog sandpaper while delivering easier cleanup.
Coarse foam compounding pad used to apply compound to remove sanding scratches and swirls. Medium cut. Convoluted foam face design holds compounds better to reduce slinging of compound. Suggested for use with Perfect-It™ Rubbing Compound (39060, 06085, 06086). Use backup pads 05717 or 05718.