SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
Two-part polyester finishing and blending putty. Includes ZNX-7® for adhesion to galvanized metal, aluminum, steel, SMC, and O.E.M paint. Extra-thin formula spreads smoothly. Easily fills grind marks, pinholes, uneven surfaces and other MetalWorks® body fillers and glazing putties to enhance their ease of working. Sands easily. Pinhole-free. Helps prevent staining or bleed-through when used under basecoat/clearcoat paint systems. Blue cream hardener included.
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
Kit contains 50 disposable lids with 200 micron filters, 50 disposable liners, and 20 sealing plugs. The 200 micron filters are recommended for traditional solvent based paint or primer applications. Graduated measurement to 5 1/2 oz when used with generic mix ratio film insert (mix ratio inserts sold separately). Max. capacity of 6 fl oz. For use with part number 16115. Note: mix ratio film inserts are sold separately.
PPS™ is a complete painting system from 3M™ which produces cleaner jobs, saves on solvent usage and gun cleaning time and can improve operator efficiency by as much as 15%. Specifically designed adapters allow painters to use the PPS™ system with virtually any spray gun. PPS™ replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use — meaning less operator exposure to solvents and reduction in VOCs. Since PPS™ uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
