Additional information
Weight | 16 lbs |
---|---|
Dimensions | 24 × 24 × 24 in |
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
$197.76
In StockEVERGLASS is a multi-fiber reinforced body repair filler ideal for filling holes, rusted metal, body seams, welds and shattered fiberglass.
• “No touch” contamination-free storage and dispensing of strainers.
• Pre-packed pods load directly into Elite Dispenser (color coded mesh only).
• Automated production with triple-cleaned mesh assures highest level of filter purity.
• Color-coded filter for easy identification of micron size
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam Trizact™ disc for use in scuff sanding blend panels before painting. Use with Hookit™ 6 inch Pad 05551, and Hookit™ Soft Interface Pad 05777.
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
No additional components are necessary. There is no other cup system with the same functions but with three components only!
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
Used in wet sanding, rough featheredging. Could be used for final sanding of plastic filler and putty. Most flexible backing with more consistent scratch pattern make this 3Ms best wet sanding product.
3M™ Vinyl Tape 471+, 06408, vinyl backing with a rubber adhesive, maintain color even when exposed to heavy abrasion, conformable, maintain color throughout not printed, dead stretch properties to provide straighter lines, clean removability. 1/2 inch x 36 yard. Purple.
Reviews
There are no reviews yet.