Additional information
Weight | 20 lbs |
---|---|
Dimensions | 28 × 27 × 26 in |
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
$203.04
In StockBuffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
3M™ Soft Edge Foam Masking Tape provides a fast and easy way to mask door jambs and other apertures, such as hood and deck lid openings.
Features:
· 30% – 50% gains in cut rate, far less loading on the job and greater worklife.
· Entirely new level of work speed is attainable.
· Agressive sanding action isn`t easily dulled.
· New anti-loading agent which actually throws dust from the grain as it cuts.
· New latex-reinforced backing can withstand whatever job torture you throw at it.
· Unparalled speed, scratch consistency and an overall quality of finish never before achieved.
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
Paintable in 30 minutes. Permanently flexible with no shrinkage. Withstands salt water and most solvents
Reviews
There are no reviews yet.