Additional information
Weight | 11 lbs |
---|---|
Dimensions | 11 × 10 × 7 in |
U-Pol Bed Liner Kit Tintable is a 2-component urethane system designed for application directly to most original manufacturers’ paint finishes or any self-etching primer surface. Dries rapidly, resists stains and abrasion, and protects against rust, corrosion, UV damage, and extreme temperatures. Also makes an excellent sound deadener under or inside vehicles. Waterproof material stays flexible and reduces road noise and vibration.
Kit Includes: (4) 750 ml (25 oz) bottles of bed liner base (tintable) (1) application spray gun (requires 8 cfm @ 50-60 psi compressed air) (1) 1 liter of hardener (1) instructions
SPECIFICATIONS: At 68°F – Pot Life is 60 minutes. Cure Time: touch dry < 1 hour subject to film buildup. Light-Duty Use: 2-3 days. Regular-Duty Use: 5-7 days. Coverage: 125 square feet (standard 8 ft bed). Total kit makes 1.06 US gallons. Additional coats can be applied after 60 minutes. UV Resistant – Will not fade. Scratch and stain resistant. Helps deaden sounds and vibrations. Rapid drying – Spray 2nd coat within an hour. High adhesion, flexible.
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
$209.99
In StockThe 3M 08308, Automix Heavy-Bodied Seam Sealer is a two-part epoxy seam sealer for use in sealing vertical or horizontal seams to match OEM sealers. It is non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime is 10 minutes. No shrinkage or cracking. Beads will remain the same size and shape as extruded. Will cure in about 1 hour. Will need 3M # 08117 Applicator Gun.
Brushable seam sealing of joints, before the installation of body components, covering strips, etc.
Sealing compound, based on synthetic rubber, temperature stable from -25 degrees C to 80 degrees C.
The 1001 Flexpert Welding Studs are the most popular stud sold. They are 2.2 mm copper coated and have been specially designed for easy welding and easy removal after the pulling is complete. The shafts are strong yet flexible. This is the preferred stud for use with slide hammers.
METAL GLAZE® Ultra is the world’s best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin™. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks® products to improve flowout. Formulated with ZNX-7® for improved adhesion.
A VOC compliant acrylic lacquer primer surfacer that easily fills grind marks, sand scratches and other minor surface imperfections. Sands easily to an ultra-fine finish with minimal shrinkage. Can be applied to prepared metal, body filler, polyester glazing putty, wood,fiberglass and aged sanded O.E.M. topcoats.
OPTIMAL COMPOUNDS & POLISHING KIT is a start-up kit that contains compounds and polish. Includes one Optimal Cut, one Optimal Polish, one Optimal Glaze, one Optimal Fast Wax, one Optimal Shine and one Buffing Pad Kit.
Reviews
There are no reviews yet.