Additional information
Weight | 1.13 lbs |
---|---|
Dimensions | 7 × 7 × 2 in |
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam Trizact™ disc for use in scuff sanding blend panels before painting. Use with Hookit™ 6 inch Pad 05551, and Hookit™ Soft Interface Pad 05777.
$156.64
In StockWeight | 1.13 lbs |
---|---|
Dimensions | 7 × 7 × 2 in |
Buffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
Super high gloss polish with Nano Technology fro extended wax protection and dirt repelling properties.
• 24-element tips ensure automatic mixing for 220ml to 600ml
U-Pol Bed Liner Kit Tintable is a 2-component urethane system designed for application directly to most original manufacturers’ paint finishes or any self-etching primer surface. Dries rapidly, resists stains and abrasion, and protects against rust, corrosion, UV damage, and extreme temperatures. Also makes an excellent sound deadener under or inside vehicles. Waterproof material stays flexible and reduces road noise and vibration.
Kit Includes: (4) 750 ml (25 oz) bottles of bed liner base (tintable) (1) application spray gun (requires 8 cfm @ 50-60 psi compressed air) (1) 1 liter of hardener (1) instructions
SPECIFICATIONS: At 68°F – Pot Life is 60 minutes. Cure Time: touch dry < 1 hour subject to film buildup. Light-Duty Use: 2-3 days. Regular-Duty Use: 5-7 days. Coverage: 125 square feet (standard 8 ft bed). Total kit makes 1.06 US gallons. Additional coats can be applied after 60 minutes. UV Resistant – Will not fade. Scratch and stain resistant. Helps deaden sounds and vibrations. Rapid drying – Spray 2nd coat within an hour. High adhesion, flexible.
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.