your trusted source for automotive paint and refinishing
Shopping Cart$109.25
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “3M 08219 SMC/Fibreglass 35min Repair Adhesive” has been added to your cart.
Sale!
3M 2097 PARTICULATE FILTER, 2097, P100
The 3M™ Particulate Filter 2097 is NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for nuisance level organic vapour relief and for ozone protection up to 10X OSHA PEL.
3M™ Particulate Filter 2097 with nuisance level organic vapour relief helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odour relief from organic vapours that are below the PEL. Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government exposure limits, whichever is lower. Do not use for respiratory protection against organic vapours or in environments that are Immediately Dangerous to Life or Health (IDLH). The 2097 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. This filter is commonly used in the following industries: agriculture, construction, general manufacturing, pharmaceuticals, primary metals.
NIOSH approved for environments containing certain oil and non-oil-based particles
Bayonet compatibility allows use with many 3M™ Half and Full Facepiece Designs
Nuisance level organic vapour relief
Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
Suggested Applications
Nuisance level organic vapour relief
Welding
Brazing
Soldering
Metal pouring
Torch cutting
Exposure to lead, asbestos, cadmium, arsenic, and MDA
Pronto Kombi Spot Putty. Little scratches. Tiny pinholes. You’re ready to prime. “Uh oh! Somebody grab the PRONTO!” This one-component, air dry kombi putty is ideal for last minute minor imperfections.
Spreads easy and dries quickly
Small enough to fit in a pocket
European style 1K air dry kombi putty
High solids for excellent fill
Minimal shrinking
Great sanding
5 ounce tube
COLOR: Olive drab (as packaged)
MIX: Ready to use
SUBSTRATE: Metal. Aluminum. Galvanized and zinc coated steel. 1K and 2K primer. Aged, sanded OEM topcoats.
SUGGESTED USE: Use for last minute repairs and minor imperfections, pinholes, chips and scratches.
TOP COAT: Primer, primer surfacer, sealer, basecoat and single stage.
METAL GLAZE® Ultra is the world’s best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin™. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks® products to improve flowout. Formulated with ZNX-7® for improved adhesion.
A flexible polyester glazing putty designed for spot filling and skim coating over repair areas on flexible bumpers and plastic parts. Its flowable viscosity is ideal for filling minor imperfections such as sand scratches, nicks, dings and gouges. Poly-Flex™ may also be used to skim coat over repair areas or large surface areas that have the original paint still intact. Blue cream hardener included.
Adhesion Promoter (SXPP/SXPP24/XPPP) is a uniquely formulated blend of proprietary resins that create a chemical bond on ‘difficult to bond to’ plastics allowing adhesion of repair fillers and coatings to these substrates. Adhesion Promoter prepares properly cleaned and/or repaired parts for the application of adhesives, fillers and topcoats. Adhesion Promoter is also used as an excellent “sealer” for all Flexible and Semi-Rigid plastics including TPO and TPE.
A high-performance, two-component rigid urethane closed-cell foam offers delayed reaction time
Foam fills posts, pillars, and other automotive body cavities to prevent panel flutter or provide rigidity
Expanding properties of foam fill hard-to-reach cavities
Foam replicates appearance and performance of many OEM products
Easy to apply with 3M™ Automix™ Applicator Gun
3M™ Rigid Pillar Foam is a two part urethane which foams in place to fill posts, pillars, and automotive body cavities with exceptional ease and consistent quality. This foam is easily to apply with a range of manual and pneumatic 3M applicators.
The design of SATAjet 5000 B has been created by the experts at the Porsche Design Studio who have translated pure functionality into aesthetic form together with the specialists at SATA. Due to the optimized shape of the gun handle, the spray gun fits perfectly in the palm of the hand. In addition, the gun handle of the DIGITAL version is identical in size to the standard model which makes it the perfect spray gun for all painters, regardless of the size of their hands.
Easy to operate
Our quest for excellent ergonomics however has not only influenced the development of the gun handle, but equally the design of spray fan control, material flow control as well as the air micrometer. Robust but still low in weight, this spray gun offers a perfect combination of ease of application and durability. SATAjet 5000 B. The ultimate spray equipment.
Product Benefits
Optimized nozzle concept for highest possible versatility concerning Inlet Pressure and spray distance
Ergonomically shaped gun handle
Pearl chrome™ surface for easy cleaning, corrosion resistant
Easy to adjust control elements
Safely positioned trigger sleeve – for easy, safe and quick insertion of the paint needle
Swivel joint with new high performance seal
Identical compact-size gun handle for non-DIGITAL and DIGITAL spray guns
Mask Filters
Reviews
There are no reviews yet.