Additional information
Weight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
XPST Flexible Epoxy is a two-component flexible modified epoxy designed for the repair of flexible plastics. XPST is formulated to work on all flexible plastics including the more common (TPUR, PUR, RIM). XPST is also compatible with the traditional “tough to bond” plastics (PP, TPO, TPE). This product is designed as an adhesive and as a filler to be used on the front and backsides of a repair. XPST can also be used over our Urethane Repair material (XSMAF). XPST is an outstanding flexible filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPST bonds, fills, and sands with outstanding performance. This flexible adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
$33.87
In StockWeight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
3M™ Hookit™ Soft Interface Pad 05777, is designed for 3M™ Hookit™ abrasives. Improves abrasive cut and finish. Reduces vibration on dual action random orbital sanders using 3M™ Hookit™ disc pads. Six inch diameter x 1/2 inch thickness x 3/4 inch center hole.
DESCRIPTION:
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
*Hardener must be ordered separately*
Trim Black is an acrylic coating formulated to match the OEM finish on automotive trim components. For use on plastic, aluminum, steel, stainless steel and chrome.
FEATURES
Fast cutting rubbing compound designed remove sand scratches and leaves a fine finish on automotive paints.
Maxim™ Control Flow seam sealer is a high strength, heavy bodied partial flow seam sealer. Its limited flow characteristics make it ideal for sloped areas such as roof lines or matching OEM sealants. Maxim™ Control Flow Seam Sealer is compatible with most topcoats and can be applied to bare metal, cured paint and surfaces primed with primer surfacers or E-coats.
Fast drying, red lacquer putty. Spreads smoothly and sands easily with minimal shrinkage
A control powder that enhances imperfections making them visible while sanding. It does not contain any solvents and does not clog the abrasive.