Additional information
Weight | 10 lbs |
---|---|
Dimensions | 8 × 7 × 7 in |
A two component primer surfacer that has exceptional filling capabilities and patented 4:1 mix ratio technology. It is ideal for holding down troublesome repairs on fiberglass and SMC. Super Build 4:1 passes 500 hours in salt spray tests (ASTM B117) and can be applied over properly sanded and cleaned bare metal. It is compatible with waterborne paint systems and VOC compliant. Must be catalyzed with 733 4:1 Polyester Primer Catalyst or 734 Fast Polyester Primer Catalyst only!
$158.77
In StockWeight | 10 lbs |
---|---|
Dimensions | 8 × 7 × 7 in |
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
No additional components are necessary. There is no other cup system with the same functions but with three components only!
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
3M™ PPS™ Series 2.0 Spray Cup System Kit, 26314, Mini (6.8 fl oz, 200 mL), 125u Micron Filter, 1 kit per case3M™ PPS™ Series 2.0 Spray Cup System is our next generation, highest-performing 3M™ Paint Preparation System (PPS™) on the disposable spray cup market. Kit contains 50 disposable lids with 200 micron or 125 micron filters, 50 disposable liners, 1 reusable hard shell cup and 32 sealing plugs.
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Use with Premium Manual Applicator 200ml 08117, 3M Static Mixing Nozzle 08193.
This product is also sold in our 400 ml size as SMC/FRP Repair – 90, 08274
Use ultra fine hand pad for light cleaning, finishing of metal, plastic, composite and wood surfaces. For final sanding of primer-surfacer. Rinses clean, will not rust an can be used over and over again.
Use for covering openings, doors, hoods, truck lids. For perfectly sealing gaps and holes.
Two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Meets GM 6449G & Chrysler MS-CD 507.