Additional information
Weight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
Two-part epoxy (1:1) used to repair most plastic parts, including bumper covers and other plastic body panels including PP, fiberglass, Metton, Telene, SMC, TEO and urethane. Formulated to finish the front side of flexible repairs or used over the top of urethane adhesives. Incredibly easy to sand in 20 minutes or less. No plastic identification required. No adhesion promoter needed No tip needed-hand mix with a clean spreader. Work time: 1-2 mins Sanding Time: 15-20 mins Paint/Cure time: 60 mins.
$93.36
In StockWeight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
Buffing foam pads with a center ring back and hex face pattern to help dissipate polish or compounds evenly, minimizing grabbing and reducing heat.
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Roll : 70 mm x 50 m
Super high gloss polish with Nano Technology fro extended wax protection and dirt repelling properties.
• 24-element tips ensure automatic mixing for 220ml to 600ml
The 3M 08308, Automix Heavy-Bodied Seam Sealer is a two-part epoxy seam sealer for use in sealing vertical or horizontal seams to match OEM sealers. It is non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime is 10 minutes. No shrinkage or cracking. Beads will remain the same size and shape as extruded. Will cure in about 1 hour. Will need 3M # 08117 Applicator Gun.