your trusted source for automotive paint and refinishing
Shopping Cart$119.36
1
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
View cart “MATRIX MT-260 R/S BLUE PHTHALO TONER 473ML” has been added to your cart.
Sale!
NORTON 31469 6″ P600B PSA A275 Chamag Discs
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
XPSAP Semi-Rigid Epoxy is a two-component semi rigid modified epoxy designed as an “ALL PURPOSE” plastic repair material. XPSAP’s unique formulation allows you to use this product on the full spectrum of automotive plastics. When in doubt on which type of plastic (flexible, semi-rigid, or rigid) you are repairing use XPSAP. XPSAP is formulated to work on all plastics including the more common and also the traditional “tough to bond” plastics (TPUR, PUR, RIM, PP, TPO, TPE). This product is designed as an adhesive and filler to be used on the front and backsides of a repair. XPSAP can also be used over our Urethane Repair material (XSMAP, XSM11000). XPSAP is an outstanding Semi-Rigid filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPSAP may also be used as a multipurpose adhesive. Some areas of use include: door skins (metal and plastic), rusted patch panels, backer panels (metal, SMC, Fiberglass, and Rigid Plastics), ground effects, etc. XPSAP bonds, fills, and sands with outstanding performance. This semi-rigid adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals
5″ Resin Fiber Sanding Disc 36 Grit Red Aluminum Oxide with 7/8″ Arbor Hole
Removes rust and surface imperfections on ferrous and non-ferrous metals and stainless.
Aluminum oxide resin fiber sanding discs are the most aggressive coated abrasive for sanding large areas. These resin fiber sanding discs have a high resistance to heat, glazing and loading, and are excellent on ferrous and non-ferrous metals. These resin fiber sanding discs are recommended for blending edges, seams and corners, weld grinding and deburring.
5 Star Xtreme Mixing Cups are easy to use when mixing paint for a full refinish or touch-up job. Cups are printed for easier viewing and precise mix ratios.
1 Pint size
Recommended by the Major Paint Companies
Available in the most popular mixing ratios 2:1, 3:1, 4:1, 5:1, 6:1 and 8:1
Carworx 2.1 VOC Bullet is a high production clearcoat system developed for spot repair and one panel repair. This 4:1 mix clearcoat is a 3 coat system that can be sanded and buffed in 20-25 minutes air dry or baked for 5 minutes at 130°F(54.4°C) metal temperature.
It is a 4:1 mix withActivator (#191.101)
Applied in 3 light coats wet-on-wet with no flash times between coats.
3M™ Automotive Attachment Tape 06377 is a .030-inch thick gray acrylic foam tape with proven performance acrylic adhesive and a red release liner.
3M™ Automotive Attachment Tape 06377 is characterized by good peel and shear adhesion, good internal strength, good conformability and good plasticizer resistance. Typical applications would include the attachment of lightweight vehicle nameplates
Rage® Xtreme™ is the world’s first truly pinhole-free premium body filler. This technically-advanced, unique formula is self-leveling for easy spreading, reducing sanding time to remove heavy texture. Easily sands with 80 grit sandpaper, eliminating the need for coarse grits that can cause sand scratch swelling. Contains Evercoat® ZNX-7® which quickly provides superior adhesion to galvanized steel and aluminum much sooner in the repair.
ZNX-7® insures faster and easier sanding without risk of pulling back the featheredge and having to re-apply filler. Formulated to resist penetration of new and more aggressive HAP*-compliant solvents and waterborne coatings, Xtreme™ improves the quality of the finish, reducing the chance for repair mapping, comebacks and redoes. This makes Xtreme™ perfect for next generation basecoat/clearcoat systems. Blue cream hardener included.(*Hazardous Air Pollutants)
Abrasives
