For dry sanding old paint, primer, primer surfacer, and between-color coats; also for deburring, removing sand scratches, shaping and finishing plastic filler, and featheredging repaired areas. Special No-Fil coating prevents premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
U-Pol Bed Liner Kit Tintable is a 2-component urethane system designed for application directly to most original manufacturers’ paint finishes or any self-etching primer surface. Dries rapidly, resists stains and abrasion, and protects against rust, corrosion, UV damage, and extreme temperatures. Also makes an excellent sound deadener under or inside vehicles. Waterproof material stays flexible and reduces road noise and vibration.
Kit Includes: (4) 750 ml (25 oz) bottles of bed liner base (tintable) (1) application spray gun (requires 8 cfm @ 50-60 psi compressed air) (1) 1 liter of hardener (1) instructions
SPECIFICATIONS: At 68°F – Pot Life is 60 minutes. Cure Time: touch dry < 1 hour subject to film buildup. Light-Duty Use: 2-3 days. Regular-Duty Use: 5-7 days. Coverage: 125 square feet (standard 8 ft bed). Total kit makes 1.06 US gallons. Additional coats can be applied after 60 minutes. UV Resistant – Will not fade. Scratch and stain resistant. Helps deaden sounds and vibrations. Rapid drying – Spray 2nd coat within an hour. High adhesion, flexible.
WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
3M™ Automotive Acrylic Foam Attachment Tape 06378 is a .030-inch thick gray acrylic foam tape with proven performance acrylic adhesive and a red release liner.
6378 is characterized by good peel and shear adhesion, good internal strength, good conformability and good plasticizer resistance. Typical applications include lightweight vehicle nameplates and trim, including narrow and light body side moldings. 06378 is not recommended for medium- to heavy-weight trim attachment.
Heavy, thixotropic formula that will not run or sag and will cure to a non-tacky surface. Wets out mat and cloth quickly. Can be filed, sanded or drilled. Impact resistant. Waterproof. Use with fiberglass mat, cloth or tape to rebuild and repair. Liquid hardener included.
Small panel (non-structural) adhesive; in universal cartridge. Incredible strength and sandability. Use for small panel bonding, repairing and filling plastic, metal, SMC and fiberglass. Applications include cab corners, door skins, small quarter panels, rust panels. Work time: 5-10 minutes. Unclamp time: 30-45 minutes.
Abrasives
Reviews
There are no reviews yet.