Additional information
Weight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
XRF Rigid Epoxy is a two-component modified rigid epoxy designed for the repair of rigid composite plastics and fiberglass. XRF is formulated to work on all rigid composite plastics including (SMC, BMC & RTM). XRF is ideal for use on fiberglass parts where extra strength is required. This product is designed as an adhesive and filler on the front and backsides of repairs. XRF can also be used over our Urethane Repair material (XSMAR). XRF is an excellent rigid filler that is commonly used by the professional plastic repairers due to its sanding, adhesion and featheredging characteristics. XRF may also be used to bond non structural metal, SMC, Fiberglass, Rigid plastics, and glass. XRF bonds, fills, and sands with no pinholes. This rigid adhesive/filler is also used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
$32.06
In StockWeight | 2 lbs |
---|---|
Dimensions | 8 × 4 × 2 in |
MSV-21 2.1 VOC Urethane Clearcoat is a low VOC clear designed for general refinish work. MSV-21 is an easy to apply medium solids clear. MSV-21 2.1
VOC Urethane Clearcoat is versatile and delivers a productive, high gloss finish.
Hardener
• MHV-21F 2.1 VOC Fast Hardener
• MHV-21N 2.1 VOC Normal Hardener
• MHV-21S 2.1 VOC Slow Hardener
*Hardener must be ordered separately*
The Scotch-Brite™ 3M™ Roloc™ + clean and strip disc aggressively removes paint and rust from seams, door jambs, drip moldings, pinchwelds and other difficult-to-reach areas. Its three-dimensional abrasive web conforms to most work pieces, offering a safer process than with wire bristle tools.
Make tough jobs easier. Scotch-Brite™ Discs can help you achieve a burr-free, paintable finish in fewer steps without damaging the base material. The non-woven, open-web, durable construction helps to resist loading and greatly increases the life of the disc. As a result, you will not have to change it as often.
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge.
A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge
Taff-Guard two layer intake panels are constructed using two synthetic layers of media sealed over a metal wire frame. The first layer, dry and white, acts as a pre-filter to remove the medium and large particles. The second layer, green with an adhesive, removes and retains the smaller particles.
Typically, this intake filter is installed in the paint booth doors and/or ceilings. However, these paint booth filters can be used in any standard HVAC application as well.
100% synthetic material with tack layer to trap dirt particles
Low resistance to air flow which results in minimal energy costs
Will not absorb moisture or humidity
Prefilter for multistage units
Paint Booth, Spray Booth and Auto body filter
Standard HVAC applications
Formulated for fast work, dries rapidely and is easy to sand. It’s creamy texture and good spreading allows easy repair of large areas. It may be applied on steel, electrozinc-coated, galvanized, aluminum or polyester surfaces.